LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Optra5 Base, Standard >> Repair and Diagnosis >> Body & Frame >> Seats >> Repair Instructions >> Seat Back Replacement - Front >> Installation Procedure

Installation Procedure

    Fig 1: View Of Seatback Bolts
    GM1308593Courtesy of GENERAL MOTORS CORP.
  1. Install the seatback onto the seat cushion.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the front seatback bolts.

    Tighten:  Tighten the front seatback bolts to 45 N.m (33 lb ft)  .

  3. Connect the electrical connectors.
    4. Fig 2: View Of Seat Trim Screws
    GM1308592Courtesy of GENERAL MOTORS CORP.
  4. Install the seat trims to its original position.
  5. Install the front bucket seat in the vehicle. Refer to Seat Replacement - Front Bucket .
scientia non olet · About LEMON Manuals