LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Optra5 Base, Standard >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Body Front End >> Repair Instructions >> Hood Latch Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Hood Release Handle And Screws
    GM1309221Courtesy of GENERAL MOTORS CORP.
  1. Position the hood latch in the location marked during removal.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the hood latch with the bolts.

    Tighten:  Tighten the hood latch bolts to 8 N.m (71 lb in)  .

scientia non olet · About LEMON Manuals