LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Optra5 Base, Automatic >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> HVAC Systems - Manual >> Repair Instructions >> Temperature Control Cable Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View Of Center Molding
    GM1308246Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.
  1. Disconnect the negative battery cable.
  2. Remove the center molding. Refer to Trim Panel Replacement - Instrument Panel (I/P) Center (Four Door) or Trim Panel Replacement - Instrument Panel (I/P) Center (Five Door/Wagon) in Instrument Panel, Gages and Console.
    3. Fig 2: View Of Temperature Control
    GM1308247Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the mode control cable from the mode door.
  4. Disconnect the temperature control cable eyelet from the post on the controller.
  5. Pry off the clip of the temperature control cable.
    6. Fig 3: Identifying Cable Eyelet
    GM1308248Courtesy of GENERAL MOTORS CORP.
  6. Slide the cable eyelet off the post on the temperature door lever.
  7. Pry off the clip of the temperature cable.
scientia non olet · About LEMON Manuals