LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Optra5 Base, Automatic >> Repair and Diagnosis >> Body & Frame >> Seats >> Repair Instructions >> Seat Replacement - Front Bucket >> Installation Procedure

Installation Procedure

    Fig 1: View Of Plastic Bolt Caps
    GM1308589Courtesy of GENERAL MOTORS CORP.
  1. Install the seat.
  2. Connect the electrical connectors.
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the bolts into the front portion of the front seat.

    Tighten:  Tighten the front seat-to-floor bolts to 25 N.m (18 lb ft)  .

  4. Install the plastic caps.
    5. Fig 2: View Of Front Seat Floor Bolts
    GM1256631Courtesy of GENERAL MOTORS CORP.
  5. Install the bolts into the rear portion of the front seat.

    Tighten:  Tighten the front seat-to-floor bolts to 25 N.m (18 lb ft)  .

  6. Install the plastic caps.
  7. Connect the negative battery cable.
scientia non olet · About LEMON Manuals