LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Optra5 Base, Automatic >> Repair and Diagnosis (Single Page) >> Electrical >> Gauges >> Instrument Panel, Gages, And Console >> Repair Instructions >> Chime Module Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Chime Module And Electrical Connector
    GM1515800Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Install the chime module with the screws.

    Tighten:  Tighten the chime module screws to 4 N.m (35 lb in)  .

  2. Connect the electrical connector.
  3. Install the knee bolster. Refer to Knee Bolster Replacement .
  4. Connect the negative battery cable.
scientia non olet · About LEMON Manuals