Installation Procedure
- Install the housing to the roof of the vehicle with the bolts.
Tighten: Tighten the sunroof housing bolts to 10 N.m (89 lb in) .
- Install the motor control module.
- Install the motor with the screws.
Tighten: Tighten the sunroof motor screws to 3 N.m (27 lb in) .
- Connect the electrical connectors.
- Install the drain hoses.
- Install the headliner. Refer to Headliner Replacement .
- Connect the negative battery cable.
NOTE:
Refer to Fastener Notice
in Cautions and Notices.