LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Optra Base, 4D Sedan, Standard >> Repair and Diagnosis >> Body & Frame >> Windows >> Doors >> Repair Instructions >> Sealing Strip Replacement - Outer Belt >> Installation Procedure

Installation Procedure

    Fig 1: Identifying Outdoor Channel Molding Screw
    GM1308995Courtesy of GENERAL MOTORS CORP.
  1. Press the outside channel molding onto the door.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the outside channel molding screw.

    Tighten:  Tighten the outside channel molding screw to 1.3 N.m (12 lb in)  .

  3. Raise the window.
scientia non olet · About LEMON Manuals