Installation Procedure

Fig 1: Removing Mounting Nut Cover From Seat Belt Adjuster

Courtesy of GENERAL MOTORS CORP.

Install the seat belt adjuster to the vehicle.
Install the upper garnish molding to the center pillar. Refer to Garnish Molding Replacement - Center Pillar Upper in Interior Trim.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the nuts to the seat belt adjuster.
Tighten: Tighten the nuts to 35 N.m (25 lb ft).
Install the mounting nut cover to the seat belt adjuster.