LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Impala SS >> Repair and Diagnosis >> External Pages >> Different car >> Section 498 (Battery, Charging System And Starting System) >> Diagnostic Information and Procedures >> DTC B1325 >> Circuit/System Testing

Circuit/System Testing

WARNING: This page is about a different car, the 2007 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. If the DTC is history refer to Charging System Test .
  2. If the DTC is current, turn On the ignition, and with a DMM, measure the voltage between the battery positive voltage circuits of the affected module and the ground circuits of the affected module.
    • If the voltage is within 9-18 volts, replace the affected module.
    • If the voltage is not within 9-18 volts, measure the voltage between the battery positive voltage circuits of the affected module and a separate good ground.
    • If the voltage is within 9-18 volts, test the battery positive ground circuits of the affected module for high resistance or an open, and repair as necessary.
scientia non olet · About LEMON Manuals