LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Impala SS >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Generator Bracket Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Removing/Installing Generator Bracket & Bolts
    GM302507Courtesy of GENERAL MOTORS CORP.
  1. Install the engine lift hook.
  2. Install the generator bracket to the engine.
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the generator bracket bolts.

    Tighten:  Tighten the bolts to 50 N.m (37 lb ft).

  4. Install the generator. Refer to Generator Replacement (3.4L)  or Generator Replacement (3.8L) .
  5. Connect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure .
scientia non olet · About LEMON Manuals