LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Impala Police >> Repair and Diagnosis >> External Pages >> Different car >> Section 1165 (Wiper System And Washer System) >> Repair Instructions >> Windshield Washer Solvent Container Hose Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2012 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Disconnecting Washer Hose And Electrical Harness From Washer Pump
    GM1206992Courtesy of GENERAL MOTORS COMPANY
  1. Connect the solvent container washer hose (1) to the washer pump (2).
  2. Install the solvent container washer hose to the washer solvent container. Ensure that the hose is routed within the channel on the side of the washer solvent container and snapped into the retaining features on the container.
  3. Route the hoses upward and into the solvent container clips.
  4. Connect the washer hose and electrical harness to the washer pump.
  5. Install the front wheelhouse panel splash shield. Refer to Front Wheelhouse Panel Splash Shield Replacement .
    6. Fig 2: Disconnecting Solvent Container Washer Hose
    GM1331351Courtesy of GENERAL MOTORS COMPANY
  6. Connect the solvent container washer hose (1) to the windshield washer hose (2).
  7. Fill the washer solvent container with washer solvent.
  8. Close the hood.
  9. Inspect the washers for proper operation.
scientia non olet · About LEMON Manuals