LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Impala Police >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System >> Repair Instructions >> Drain Cock Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Removing/Installing Drain Cock
    GM1272787Courtesy of GENERAL MOTORS CORP.
  1. Install the seal on the drain cock stem.
  2. Install the drain cock. Make sure that the body is fully seated in the side tank of the radiator.
  3. Screw the radiator drain cock in to the radiator.
  4. Fill the cooling system. Refer to Draining and Filling Cooling System .
scientia non olet · About LEMON Manuals