Typical Scan Tool Data
WARNING: This page is about a different car, the 2010 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
Battery Voltage Signal - BCM
| Circuit | Short to Ground | Open | Short to Voltage |
|---|---|---|---|
| Operating Conditions:
Ignition ON, Engine OFF. Parameter Normal Value: 12.60 Volts |
|||
| B+ Terminal D12 X3 | 0.00 Volts* | 0.00 Volts* | - |
| *The scan tool will not power up from the DLC if the B+ circuit terminal D12 X3 is open or shorted to ground. | |||
Batt. Voltage High Res. - BCM
| Circuit | Short to Ground | Open | Short to Voltage |
|---|---|---|---|
| Operating Conditions:
Ignition ON, Engine OFF. Parameter Normal Value: 12.600 Volts |
|||
| B+ Terminal 11 X1 | 0.000 Volts | 0.000 Volts | - |
| Ground Terminal 9 X1 | - | 0.000 Volts | - |