Circuit/System Verification
WARNING: This page is about a different car, the 2008 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
- Verify the SGCM coolant pump operates.
- Ignition ON, command the scan tool SGCM coolant pump output control ON and OFF.
- If the SGCM coolant pump does not operate refer to SGCM Coolant Pump Malfunction in Circuit/System Testing .
- Inspect all 12-volt battery connections for a short to ground as follows:
- At battery
- At SGCM
- At fuse block
- If all connections are normal, replace the SGCM.