LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Impala LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 837 (Wiper System & Washer System) >> Diagnostic Information and Procedures >> DTC B3922 >> Circuit/System Testing

Circuit/System Testing

WARNING: This page is about a different car, the 2008 Buick Lucerne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition OFF, disconnect the X3 harness connector at the turn signal multifunction switch.
  2. Ignition ON, verify the scan tool Windshield Wiper Switch parameter is OFF.
    • If not the specified value, test the signal circuit terminal N for a short to ground. If the circuit tests normal, replace the BCM.
  3. If all circuits test normal, test or replace the turn signal multifunction switch.