LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Impala LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Lighting Systems) >> Repair Instructions >> Stop Lamp Switch Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Monte Carlo and 2004 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the stop lamp switch (2) to the brake pedal bracket.
  2. Connect the electrical connector to the stop lamp switch.
    3. Fig 1: Identifying Brake Pedal & Stop Lamp Switch
    GM575743Courtesy of GENERAL MOTORS CORP.
  3. Adjust the stop lamp switch. Refer to Stop Lamp Switch Adjustment .
  4. Install the left I/P insulator.
scientia non olet · About LEMON Manuals