LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Impala Base, 3.4 E >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 3.4L - Introduction (2 Of 2) >> Repair Instructions >> Throttle Position (TP) Sensor Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View Of TP Sensor & Electrical Connector
    GM69065Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the fuel lines. Refer to Quick Connect Fitting(s) Service (Metal Collar) .
  2. Disconnect the throttle position (TP) sensor electrical connector.
    3. Fig 2: Removing/Installing TP Sensor Screws
    GM201482Courtesy of GENERAL MOTORS CORP.
  3. Remove the TP sensor screws.
    4. Fig 3: View Of TP Sensor
    GM201473Courtesy of GENERAL MOTORS CORP.
  4. Remove the TP sensor and the O-ring.
scientia non olet · About LEMON Manuals