LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Equinox LT, FWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Shift Interlock System >> Repair Instructions >> Shift Lock Solenoid/Switch Assembly Replacement >> Removal Procedure

Removal Procedure

  1. Remove the shift control assembly. Refer to Shift Control Replacement .
    2. Fig 1: Disconnecting Plastic Retainers At Solenoid Base & Park Lock Lever
    GM944042Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the brake transaxle shift interlock (BTSI) solenoid harness connector.
  3. Using a screwdriver, disconnect the plastic retainers at solenoid base and at the park lock lever.
  4. Remove the solenoid from the shift control assembly.
scientia non olet · About LEMON Manuals