LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Epica LS >> Repair and Diagnosis >> Electrical >> Component Locations >> Lighting Systems >> Repair Instructions >> Tail Lamp Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Tail Lamp Assembly, Bulbs, Fasteners And Electrical Connector
    GM1256517Courtesy of GENERAL MOTORS CORP.
  1. Install the replacement bulbs.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the lamp assembly with the nuts.

    Tighten:  Tighten the rear combination lamp assembly nuts to 2 N.m (18 lb in)  .

  3. Connect the electrical connectors.
  4. Connect the negative battery cable.
scientia non olet · About LEMON Manuals