LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Epica LS >> Repair and Diagnosis >> Electrical >> Component Locations >> Lighting Systems >> Repair Instructions >> Stop Lamp Switch Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Identifying Stop Lamp Switch Electrical Connector
    GM1537922Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.
  1. Disconnect the negative battery cable.
  2. Disconnect the stoplamp switch electrical connector.
  3. Twist the switch, and remove the switch from the brake pedal bracket.
scientia non olet · About LEMON Manuals