LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Epica LS >> Repair and Diagnosis >> Electrical >> Component Locations >> Lighting Systems >> Repair Instructions >> Repeater Lamp Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View Of Side Turn Signal Lamp And Electrical Connector
    GM1256516Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.
  1. Disconnect the negative battery cable.
  2. Slide the side turn signal lamp to the left.
  3. Remove the side turn signal lamp from the fender.
  4. Disconnect the electrical connector.
  5. Twist and remove the bulb from the side turn signal lamp.
scientia non olet · About LEMON Manuals