LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Epica LS >> Repair and Diagnosis >> Electrical >> Component Locations >> Lighting Systems >> Repair Instructions >> Door Lamp Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Front Door Step Lamp And Lens
    GM1256530Courtesy of GENERAL MOTORS CORP.
  1. Connect the electrical connector.
  2. Install the replacement front door step lamp bulb.
  3. Install the lower half of the door trim panel to its original position.
  4. Install the front door step lamp lens cover.
  5. Connect the negative battery cable.
scientia non olet · About LEMON Manuals