LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Epica LS >> Repair and Diagnosis >> Electrical >> Component Locations >> Lighting Systems >> Repair Instructions >> Ashtray Lamp Bulb Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Identifying Ashtray Lamp Bulb And Electrical Connector
    GM1256541Courtesy of GENERAL MOTORS CORP.
  1. Connect the replacement bulb to the ashtray lamp housing electrical connector.
  2. Install the replacement bulb into the ashtray lamp housing.
    3. Fig 2: View Of Ashtray Housing And Screws
    GM1256540Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the ashtray housing with the screws.

    Tighten:  Tighten the ashtray housing screws to 2.5 N.m (22 lb in)  .

  4. Install the console cover.
  5. Connect the negative battery cable.
scientia non olet · About LEMON Manuals