LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Cutaway 6.0 U >> Repair and Diagnosis >> Body & Frame >> Frames, Subframes & Crossmembers >> Frame And Underbody >> Repair Instructions >> Engine Protection Shield Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Engine Protection Shield
    GM890563Courtesy of GENERAL MOTORS CORP.
  1. Install the engine protection shield.
    2. Fig 2: Engine Protection Shield Mounting Bolts
    GM890567Courtesy of GENERAL MOTORS CORP.
  2. Install the engine protection shield mounting bolts, light duty shown, heavy duty similar.

    Tighten:  Tighten the bolts to 20 N.m (15 lb ft).

  3. Lower the vehicle.
scientia non olet · About LEMON Manuals