LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Cutaway 4.8 V >> Repair and Diagnosis >> External Pages >> Different car >> Section 134 (Engine Control System - 4.3L - Introduction) >> Repair Instructions >> Ignition Control Module Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2005 GMC Savana and 2005 Chevrolet Chevy Express. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the engine cover. Refer to Engine Cover Replacement in Interior Trim.
    2. Fig 1: View Of Ignition Control Module Assembly
    GM690078Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the electrical connector (3).
  3. Remove the screws (4) holding the ignition control module (2) and the heat sink (1) to the bracket.
  4. Remove the ignition control module and the heat sink.
scientia non olet · About LEMON Manuals