LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Corvette 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 161 (Engine Mechanical) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Intake Plenum Removal >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2005 Saturn L300. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing & Installing Front Intake Manifold Runner
    GM896433Courtesy of GENERAL MOTORS CORP.
  1. Remove the runner clamps at the rear of the plenum.
  2. Remove the runners.
    3. Fig 2: Removing & Installing Intake Plenum
    GM896435Courtesy of GENERAL MOTORS CORP.
  3. Remove the intake plenum bolts.
  4. Remove the intake plenum.
  5. Remove the intake seals.
scientia non olet · About LEMON Manuals