LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Corvette 2D Convertible, Standard >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Starter Motor Replacement >> Removal Procedure

Removal Procedure

CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.
    Fig 1: Positive & Negative Battery Cable
    GM675304Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure (7.0L) .
  2. Remove the catalytic converter. Refer to Catalytic Converter Replacement (Left) or Catalytic Converter Replacement (Right) in Engine Exhaust.
    3. Fig 2: Solenoid Engine Harness Leads & Positive Battery Cable Terminal
    GM675453Courtesy of GENERAL MOTORS CORP.
  3. Remove the positive battery cable nut.
  4. Remove the positive battery cable terminal and the engine harness leads from the solenoid.
  5. Remove the S terminal nut (2).
  6. Remove the purple wire lead (1) and washer from the solenoid.
    7. Fig 3: Starter Motor Bolts
    GM74063Courtesy of GENERAL MOTORS CORP.
  7. Support the starter motor.
  8. Remove the starter motor bolts.
  9. Remove the starter motor.
scientia non olet · About LEMON Manuals