Scan Tool Data List
WARNING: This page is about a different variant/trim than selected.
Body Control Module (BCM)
| Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
| Operating Conditions: Ignition ON, with the Engine OFF. Transmission Shift Lever in the PARK Position. | |||
| Battery Voltage Signal | BCM Data | 0-15 volts | 14 volts |
| BTSI Solenoid | BCM Data | ON/OFF | ON |
Engine Control Module (ECM) / Powertrain Control Module (PCM)
| Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
| Operating Conditions: Ignition ON, with the Engine OFF. Transmission Shift Lever in the PARK Position. | |||
| Ignition 1 Signal | ECM/PCM | Volts | 12 Volts |
| Stoplamp Pedal Switch | ABS, ECM/PCM | Applied/Released | Applied |
| TR Sw. A/B/C/P | Transmission Data | Park, Park/Reverse, Reverse, Reverse/Neutral, Neutral, Neutral/Drive 4, Drive 4, Drive 4/Drive 3, Drive 3, Drive 3/Drive 2, Drive 2, Drive 2/Drive 1, Drive 1, Invalid, Open | - |
| TCC Brake Switch | Transmission Data | ON/OFF | OFF |