LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Cobalt SS >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Horn System) >> Repair Instructions >> Horn Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Saturn Ion Red Line, 2004 Saturn Ion 3, 2004 Saturn Ion 2, and 2004 Saturn Ion 1. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the horn into the slot in the front frame rail.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the horn bracket bolt.

    Tighten:  Tighten the bolt to 10 N.m (89 lb in).

  3. Connect the horn electrical connector.
    4. Fig 1: View Of Horn
    GM882163Courtesy of GENERAL MOTORS CORP.
  4. Install the left headlamp assembly. Refer to Headlamp Assembly or Headlamp Bulb Replacement or to Headlamp Assembly or Headlamp Bulb and/or Cornering, Sidemarker, Park, Turn Signal Bulb Replacement in Lighting Systems.
scientia non olet · About LEMON Manuals