LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Cobalt SS >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Engine Controls (Introduction)) >> Repair Instructions >> Throttle Body Assembly Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Saturn Ion Red Line. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Resonator Replacement .
  2. Disconnect the evaporative emission (EVAP) purge line.
  3. Disconnect the throttle body control harness connector.
  4. Remove the throttle body attaching bolts.
  5. Remove the throttle body and gasket from the supercharger.
    6. Fig 1: View Of Throttle Body & Gasket
    GM1339289Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals