LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Cobalt SS >> Repair and Diagnosis >> Body & Frame >> Windows >> Stationary Window System >> Repair Instructions >> Rear Window Replacement >> Installation Procedure

Installation Procedure

  1. Install the stationary rear window into the opening. Refer to Urethane Adhesive Installation of Stationary Windows .
    2. Fig 1: Locating Rear Window Defogger Electrical Connector
    GM401856Courtesy of GENERAL MOTORS CORP.
  2. Connect the rear window electrical connectors.
  3. Install the lock pillar garnish moldings. Refer to Garnish Molding Replacement - Lock Pillar Upper in Interior Trim.
  4. Close the rear compartment lid.
  5. Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
scientia non olet · About LEMON Manuals