LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Cobalt LT, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 2.2L - (Introduction) >> Repair Instructions >> Air Cleaner Outlet Resonator Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Air Cleaner Outlet Resonator
    GM851256Courtesy of GENERAL MOTORS CORP.
  1. Install the air outlet resonator to the throttle body.
  2. Connect the fresh air duct to the air outlet resonator.
  3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  4. Tighten the air outlet resonator to throttle body clamp.

    Tighten:  Tighten the clamp to 5 N.m (44 lb in).

  5. Align the air outlet resonator to the bracket and install the push-pin fastener.
  6. Fig 2: View Of IAT Sensor Harness Connector
    GM851290Courtesy of GENERAL MOTORS CORP.
  7. Connect the air cleaner assembly fresh air duct to the air outlet resonator.

    Tighten:  Tighten the clamp to 5 N.m (44 lb in).

  8. Connect the IAT sensor harness connector.