LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Classic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - Introduction & Repair Instructions >> Repair Instructions >> Oil Pan Replacement >> Installation Procedure

Installation Procedure

  1. Clean and inspect the oil pan for dents or damage. Dry the oil pan before installation.
    2. Fig 1: Locating Oil Pan Gasket
    GM104471Courtesy of GENERAL MOTORS CORP.
  2. Install the oil pan gasket. Use a new gasket if the sealing ribs are damaged.
    3. Fig 2: View of Oil Pan
    GM104468Courtesy of GENERAL MOTORS CORP.
  3. Install the oil pan. Replace the bottom pan if damaged.
    4. Fig 3: Identifying Oil Pan Bolts
    GM104466Courtesy of GENERAL MOTORS CORP.
  4. Install the oil pan attaching bolts.

    Tighten:  Tighten the bolts to 10 N.m (89 lb in).

  5. Lower the vehicle.
  6. Check the pan for leaks. Refill the transmission to the proper level with DEXRON®-III. Refer to Fluid Capacity Specifications .
  7. Recheck the fluid level. Refer to Transmission Fluid Checking Procedure .
  8. Inspect the oil pan gasket for leaks.
scientia non olet · About LEMON Manuals