LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Classic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - Introduction & Repair Instructions >> Repair Instructions >> Intermediate/Fourth Servo Assembly Replacement >> Installation Procedure

Installation Procedure

  1. Assemble the intermediate/4th servo assembly. Refer to Intermediate/Fourth Servo Assemble and Installation in Automatic Transmission, Transaxle Unit Repair Manual.
    2. Fig 1: View Of Intermediate/Fourth Servo Assembly & Bolts
    GM589165Courtesy of GENERAL MOTORS CORP.
  2. Install the intermediate/4th band servo piston spring, the servo and the servo cover bolts.

    Tighten:  Tighten the bolts to 12 N.m (106 lb in).

  3. Install the oil feed pipes. Refer to Oil Feed Pipes Replacement .
  4. Install the filter and the pan. Refer to Oil Filter and Seal Replacement .
  5. Lower the vehicle.
  6. Fill the transmission with Dexron® III fluid. Refer to Fluid Capacity Specifications .
  7. Connect the negative battery cable.
  8. Inspect the transmission oil level. Refer to Transmission Fluid Checking Procedure .
scientia non olet · About LEMON Manuals