LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Classic >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Instrument Panel System Displays, Gauges And Console) >> Diagnostic Information and Procedures >> Scan Tool Output Controls

Scan Tool Output Controls

WARNING: This page is about a different car, the 2004 Pontiac Grand Am and 2004 Oldsmobile Alero. However, it is still accessible from the selected car via links, so may be relevant.
IPC Scan Tool Output Controls

Scan Tool Output Control Additional Menu Selections Description
Coolant Gauge Sweep Test IPC Gauges The IPC drives the engine coolant temperature gage at or above 260°F (H) when you select Up. The IPC drives the engine coolant temperature gage at or below 100°F (C) when you select Down.
Fuel Gauge Sweep Test IPC Gauges The IPC drives the fuel gage at or above full when you select Up. The IPC drives the fuel gage at or below empty when you select Down.
Lamp Test Special Functions The IPC illuminates the indicators, excluding the MIL, high beam, and turn signals, when you select On.
Speed Gauge Sweep Test IPC Gauges The IPC drives the speedometer at or above the maximum displayed speed when you select Up. The IPC drives the speedometer at or below 0 km/h (0 mph) when you select Down.
Tach Gauge Sweep Test IPC Gauges The IPC drives the tachometer at or above 7000 RPM when you select Up. The IPC drives the tachometer at or below 0 RPM when you select Down.
PCM Scan Tool Output Controls - 3.4L

Scan Tool Output Control Additional Menu Selections Description
Oil Life Reset Engine Output Controls The PCM resets the oil life monitor to the desired percent.
Radio Scan Tool Output Controls

Scan Tool Output Control Additional Menu Selections Description
Chime Tone Test Output Control The radio activates an audible warning when you select On.