Installation Procedure
- Install the ground cable.
- Install the nut to retain the ground cable to the bellhousing stud.
- Install the front transmission mount. Refer to Transmission Mount Replacement - Front
in Automatic Transmission.
- Install the lower closeout panel.
- Lower the vehicle.
- Install the negative cable to the retainers.
Courtesy of GENERAL MOTORS CORP.
- Tape the positive cable and ground strap to the negative cable.
Courtesy of GENERAL MOTORS CORP.
- Install the bolt to retain the ground cable to the core support.
- Connect the negative ground cable (2). Refer to Battery Negative Cable Disconnect/Connect Procedure .