LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Chevy Express G3500, Van Passenger Extended >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 4.8L, 5.3L, And 6.0L - Introduction >> Repair Instructions >> Accelerator Controls Cable Replacement >> Removal Procedure

Removal Procedure

  1. Remove the engine cover. Refer to Engine Cover Replacement in Interior Trim.
  2. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
    3. Fig 1: View Of Accelerator/Throttle Cable
    GM389031Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the accelerator cable from the throttle body lever.
    4. Fig 2: Locating Accelerator Control Cable and Cruise Control Cable
    GM389853Courtesy of GENERAL MOTORS CORP.
  4. Remove the accelerator cable from the cable bracket.
    5. Fig 3: View Of Accelerator Cable At Engine Sight Shield Mounting Bracket
    GM389852Courtesy of GENERAL MOTORS CORP.
  5. Unclip the accelerator cable from the engine sight shield mounting bracket and the generator bracket.
    6. Fig 4: View Of Accelerator Cable Tangs, Pedal Lever & Cable Retainer
    GM372959Courtesy of GENERAL MOTORS CORP.
  6. Remove the left instrument panel (IP) insulator.
  7. Disconnect the accelerator cable retainer (3) from the accelerator pedal lever (2).
  8. Squeeze the accelerator cable cover tangs (1) and push the cable through the dash panel.
  9. Remove the accelerator cable.
scientia non olet · About LEMON Manuals