LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Cavalier Base, 4D Sedan, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - Introduction & Repair Instructions >> Repair Instructions >> Shift Control Cable Replacement - Floor Shift >> Removal Procedure

Removal Procedure

  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure in Engine Electrical.
    2. Fig 1: Identifying Automatic Transmission Cable & Selector Lever
    GM893831Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the automatic transmission cable from the selector lever.
    3. Fig 2: View Of Range Select Lever Cable
    GM104478Courtesy of GENERAL MOTORS CORP.
  3. Remove the range select lever cable from the cable bracket.
  4. Remove the front floor console. Refer to Console Replacement - Front Floor in Body-Instrument Panel and Console.
    5. Fig 3: View Of Range Select Lever Cable
    GM104480Courtesy of GENERAL MOTORS CORP.
  5. Remove the range select lever cable from the automatic transmission control.
  6. Remove the cable grommet at the cowl.
  7. Remove the cable from the vehicle.
scientia non olet · About LEMON Manuals