LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Cavalier Base, 4D Sedan, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - Introduction & Repair Instructions >> Repair Instructions >> Oil Pan Replacement >> Installation Procedure

Installation Procedure

  1. Clean and inspect the oil pan for dents or damage. Dry the oil pan before installation.
    2. Fig 1: Locating Oil Pan Gasket
    GM104471Courtesy of GENERAL MOTORS CORP.
  2. Install the oil pan gasket. Use a new gasket if the sealing ribs are damaged.
    3. Fig 2: View of Oil Pan
    GM104468Courtesy of GENERAL MOTORS CORP.
  3. Install the oil pan. Replace the bottom pan if damaged.
    4. Fig 3: Identifying Oil Pan Bolts
    GM104466Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  4. Install the oil pan attaching bolts.

    Tighten:  Tighten the bolts to 14 N.m (124 lb in).

  5. Lower the vehicle.
  6. Fill the transmission.
  7. Inspect the transmission fluid level. Refer to Transmission Fluid Checking Procedure
  8. Inspect the oil pan gasket for leaks.
scientia non olet · About LEMON Manuals