Installation Procedure

WARNING: This page is about a different car, the 2005 GMC Safari and 2005 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Expanded View Of Engine Cover

Courtesy of GENERAL MOTORS CORP.

Install the engine cover.

Fig 2: Locating Engine Cover Screws

Courtesy of GENERAL MOTORS CORP.

Install the screws to the engine cover.
Do not fully tighten the screws.

Fig 3: Identifying Engine Cover Latches

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the latch screws.
Tighten: Tighten the latch screws to 4 N.m (35 lb in).
Install the engine cover bolts to the brackets.
Tighten: Tighten the engine cover bolt to 25 N.m (18 lb ft).

Fig 4: Expanded View Of Floor Air Outlet Duct

Courtesy of GENERAL MOTORS CORP.

Insert the floor air outlet duct. Refer to Instrument Panel (I/P) Extension Replacement in Instrument Panel, Gages and Console.
Insert the instrument panel extension. Refer to Air Outlet Replacement - Center Floor in Heating, Ventilation and Air Conditioning.