LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Blazer 4D Utility, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Interior Trim) >> Repair Instructions >> Engine Cover Guide Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 GMC Safari and 2005 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the engine cover guide assembly.
    2. Fig 1: View Of Engine Cover Guide Assembly Retaining Bolts
    GM314659Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the bolts that retain the engine cover guide assembly to the vehicle.

    Tighten:  Tighten the bolts that retain the engine cover guide to 8.5 N.m (75 lb in).

  3. Install the engine cover. Refer to Engine Cover Replacement  .
scientia non olet · About LEMON Manuals