LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 43 (Engine Cooling System) >> Repair Instructions >> Drain Cock Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 GMC Safari and 2005 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Drain Stem And Seal
    GM23699Courtesy of GENERAL MOTORS CORP.
  1. Install the drain cock body. Ensure that the body is fully seated in the side tank and that the locking tangs are engaged.
  2. Install the seal on the drain cock stem.
  3. Install the drain cock. Turn the stem clockwise to lock.
  4. Refill the coolant to the proper level. Refer to Draining and Filling Cooling System .
  5. Start the engine. After the engine reaches normal operating temperature, check for coolant leaks.