LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Body Front End) >> Repair Instructions >> Hood Hold-Open Rod Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 GMC Safari and 2005 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Push the support rod retainer into place.
    2. Fig 1: Expanded View Of Hood Hold-Open Rod
    GM321602Courtesy of GENERAL MOTORS CORP.
  2. Insert the retainer tab into the slot in order to install the support rod to the vehicle.
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the support rod-to-radiator support bolt.

    Tighten:  Tighten the support rod to radiator support bolts to 15 N.m (11 lb ft).

  4. Lower the hood.
scientia non olet · About LEMON Manuals