LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Battery, Charging System And Starting System) >> Repair Instructions >> Generator Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 GMC Safari and 2005 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Generator Mounting Bolts
    GM332407Courtesy of GENERAL MOTORS CORP.
  1. Position the generator on the vehicle.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Loosely install the mounting bolts.
  3. Install the generator output (BAT) lead.
  4. Loosely install the generator output (BAT) nut.

    Tighten: 

    • Tighten the mounting bolts to 50 N.m (37 lb ft).
    • Tighten the generator output (BAT) terminal nut to 10 N.m (89 lb in).

  5. Connect the regulator electrical connector.
  6. Install the drive belt. Refer to Drive Belt Replacement in Engine Mechanical-4.3L.
  7. Install the air cleaner. Refer to Air Cleaner Assembly Replacement in Engine Controls-4.3L.
  8. Connect the battery negative cable.
scientia non olet · About LEMON Manuals