Installation Procedure

WARNING: This page is about a different car, the 2005 GMC Safari and 2005 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Battery Hold-Down Retainer & Bolt

Courtesy of GENERAL MOTORS CORP.

Install the battery into the cleaned carrier.
Install the battery hold-down retainer.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the retainer bolt.
Tighten: Tighten the bolt to 23 N.m (17 lb ft).
Connect the battery positive cable.
Tighten: Tighten the cable bolt to 15 N.m (11 lb ft).
Connect the battery negative cable.
Tighten: Tighten the cable bolt to 15 N.m (11 lb ft).