Removal Procedure

WARNING: This page is about a different car, the 2005 GMC Safari and 2005 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Throttle Position (TP) Sensor Harness Connector

Courtesy of GENERAL MOTORS CORP.

Remove the engine cover. Refer to Engine Cover Replacement in Interior Trim.
Disconnect the throttle position (TP) sensor harness connector.

Fig 2: View Of TP Sensor Screws

Courtesy of GENERAL MOTORS CORP.

Remove the mounting bolts from the TP sensor.

Fig 3: View Of TP Sensor

Courtesy of GENERAL MOTORS CORP.

NOTE: The TP sensor is an electrical component. Do not soak the TP sensor in any liquid cleaner or solvent, as damage may result.

Remove the TP sensor and gasket from the throttle body assembly.