Removal Procedure

WARNING: This page is about a different car, the 2005 GMC Safari and 2005 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Spark Plug Wire Retaining Bracket

Courtesy of GENERAL MOTORS CORP.

Disconnect the spark plug wire at each spark plug.
- Twist the boots 1/2 turn before removing the boots.
- Pull only on the boot or use a tool designed for this purpose in order to remove the wire from each spark plug.
Disconnect the spark plug wire from the distributor.
- Twist each spark plug boot 1/2 turn.
- Pull only on the boot or use a tool designed for this purpose in order to remove the wires from the distributor.