Installation Procedure

WARNING: This page is about a different car, the 2005 GMC Safari and 2005 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Air Cleaner Cover At MAF Sensor View

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

IMPORTANT: Point the flow arrows on the MAF sensor away from the air cleaner.

Attach the MAF sensor to the air cleaner cover by tightening the hose clamp.
Tighten: Tighten the clamp to 4 N.m (35 lb in).

Fig 2: Identifying Air Cleaner Outlet Duct At MAF Sensor

Courtesy of GENERAL MOTORS CORP.

Attach the air cleaner outlet duct to the MAF sensor by tightening the hose clamp.
Tighten: Tighten the clamp to 4 N.m (35 lb in).

Fig 3: Identifying Air Cleaner Cover

Courtesy of GENERAL MOTORS CORP.

Install the air cleaner cover by fastening the air cleaner cover retainer clips.

Fig 4: View Of MAF Sensor Harness Connector

Courtesy of GENERAL MOTORS CORP.

Connect the MAF sensor harness connector.