LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Blazer 2D Utility, 4WD, Part Time, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Engine Controls - (Introduction) Specifications & Repair Instructions) >> Repair Instructions >> Manifold Absolute Pressure (MAP) Sensor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 GMC Safari and 2005 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the new MAP sensor grommet on the MAP sensor.
    2. Fig 1: View Of MAP Sensor
    GM10933Courtesy of GENERAL MOTORS CORP.
  2. Install the MAP sensor.
    3. Fig 2: View Of MAP Sensor Harness Connector
    GM12817Courtesy of GENERAL MOTORS CORP.
  3. Connect the MAP sensor harness connector.
  4. Install the engine cover. Refer to Engine Cover Replacement in Interior Trim.
scientia non olet · About LEMON Manuals