LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Blazer 2D Utility, 4WD, Part Time, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Engine Controls - (Introduction) Specifications & Repair Instructions) >> Repair Instructions >> Filler Tube Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 GMC Safari and 2005 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Expanded View Of Fuel Filler Tube & Fuel Filler Pocket Screws
    GM420637Courtesy of GENERAL MOTORS CORP.
  1. Install the fuel filler tube into the fuel tank.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the fuel filler tube attaching screw (2).

    Tighten:  Tighten the attaching screw to 11.5 N.m (102 lb in).

  3. Connect the fuel filler tube hose and clamp (3).

    Tighten:  Tighten the fuel fill hose clamp to 3 N.m (27 lb in).

  4. Install the fuel filler tube screws at the fuel filler pocket.

    Tighten:  Tighten the fuel filler tube screws to 1.9 N.m (17 lb in).

  5. Connect the negative battery cable.
  6. Refill the fuel tank.
  7. Inspect for fuel leaks.
scientia non olet · About LEMON Manuals